Features  

•  0.4 W output power at 266 nm  
• High brilliance UV radiation  
• Up to 100 kHz repetition rate 
• Robust and sealed cavity  
• Low operating costs  
• Electro-optical Q-switching  
• First pulse suppression  
• Internal output power monitoring  
• Internal/external triggering  
• Processor control via USB/CAN  
• Remote control via keypad  
• No external water cooling  

 Applications  

• Marking 
• Engraving  
• Micromachining  
• Ablation 
• Drilling  
• Cutting  
• Structuring  
• Trimming  
• Mask repair  
• Cleaning  
• Your application is welcome...

A diode pumped solid state Nd:YVO4 UV lasers offer high output power of UV radiation together with high repetition rate.
The innovative electro-optical Q-switch is a key technology for generation of the record short pulses between all high power nanosecond lasers.
High beam quality together with short pulse duration and high output power make the UV laser to high brilliance source (tool) for processing of almost all engineering materials used in semiconductor and electronic industry.
Rugged body made of machined aluminum as well as sealed cavity ensures stable and reliable operation in diverse conditions of laboratory and factory working place.
The Glam series lasers are equipped with intelligent control system. Output power as well as other parameters of the laser is monitored continuously in order to ensure long term repeatability of performance and easy adaptation of the laser into high throughput material processing systems.
Short pulse duration, high repetition rate and robust design make these lasers an attractive tool for wide range of material processing applications, including polymers, semiconductors, composites, dielectrics.

Specifications

Model	Glam 4
Output wavelength	266 nm
Output power, W	0.4 at 20 kHz
Pulse to pulse energy stability, %	5 (rms) at 20 kHz
Power stability	± 3 % over 8 hours when room temperature does not change more than ± 2 °C
Pulse duration, ns	4-25
Repetition rate, kHz	up to 100
Beam diameter, mm	~0.8
Beam profile	TEM 00
M2	<1.5
Beam divergence, mrad	1.1
Beam elipticity	>0.8 at 20 kHZ
Polarization	Linear, horizontal >100:1
Timing jitter	<0.5 ns at 1-50 kHz

Physical characteristics 

 

Model	Glam4
Laser head size ( W x H x L), mm	286 x 114 x 710
Power supply/pump diode unit (W x H x L) , mm	472 x 289 x 461
Umbilical length, m	2.8

Operating requirements

Model	Glam4
Ambient temperature, °C	18-27
Relative humidity (non-condensing), %	10-80
Voltage	100-240 VAC, single phase 50/60 Hz
Power, kW	<0.25

 Specifications are subject to changes without advance notice