特征

• 重复频率达到100 kHz 
• 输出功率可达15 W@1064 nm
• 脉冲宽度< 28 ns
• 532, 355, 266 nm 波长可选
• 内/外触发
• 电光调Q
• Simple and cost effective design
• Small footprint
• 稳固且密封的谐振腔
• 封闭环形的TEC冷却器
• 通过RS232或 USB/CAN进行处理控制/诊断
• 通过按键进行遥控操作

 Applications

• 打标
• 雕刻
• 微加工
• 消融
• 钻孔
• 切割
• 构造
• 消除焊缝
• 掩饰修补
• 清洗
• 欢迎您的应用...

A diode pumped Q-switched solid state Nd:YVO₄ laser offers up to 15 W output power and high 100 kHz repetition rate.
Less than 10 ns pulse duration at low repetition rates is achieved due to the innovative Q-switching method. Short pulse duration, high repetition rate and robust design make this laser an attractive tool for wide range of material processing applications.
Featuring high repetition rate and turn-key operation NL15100 series laser is ideal for integrating into high throughoutput material processing systems. Sealed cavity as well as rugged body ensures reliable operation.

Specifications 

MODEL	NL15100
Output power, W
at 1064 nm @ 100 KHz	15
at 532 nm @ 20 kHz	5.5
at 355 nm @ 20 kHz 1)	3.5
Pulse duration, ns 2)	7–28
Repetition rate, kHz	0–100
Beam diameter, mm	1.5
Beam profile	TEM00
M2	< 1.5
Beam divergence, mrad 3)	< 2.5
Polarization	linear, horizontal > 100:1

1)  266 nm wavelength available.
2)   FWHM @ 1064 nm. Depends on repetition rate.
3)    Full angle at 1/e2.

Physical characteristics 

Laser head size 4) (W×H×L), mm	366×122×751
Power supply/pump diode unit (W×H×L), mm	472×289×461
Umbilical length, m 5)	3

4)     Including harmonics unit.
5)     Other lengths available.

Operating requirements

Ambient temperature, °C	15–30
Relative humidity (noncondensing), %	10–80
Voltage	100–240 VAC, single phase 50/60 Hz
Power, kW	< 1.5