欧兰科技 -产品指南-激光器和激光系统-半导体泵浦激光器-PL2210 系列半导体泵浦皮秒Nd:YAG激光器-各种激光器，光谱测量，材料应力和形变分析,CCD相机, 光学传感器，精密位移台，PIV，PLIF等- Powered By SiteEngine

短脉冲宽度,高能量,高达2 kHz的重复频率和卓越的脉冲稳定性使得PL2200系列二极管泵浦皮秒激光器成为众多应用的首选，像材料加工，激光光谱，光学参量发生器泵浦及其他应用。

Angle-tuned LBO and KDP crystals mounted in thermostabilised ovens are used for second, third and fourth harmonic generation. Harmonics separators ensure high spectral purity of each harmonic directed to different output port.

For customer convenience the laser is controlled through its RS 232 type PC interface with LabView drivers (included) or a user-friendly remote control pad. The remote pad allows easy control of all the parameters and features a backlit display that is easy to read even while wearing laser safety eyewear.

Build in energy monitors ensure easy operation control. Data from the energy monitor can be seen on the remote keypad or PC monitor via the LabView drivers. LabView drivers, supplied together with the laser, enables long term monitoring of the output energy.

型号	PL2210	PL2210A	PL2210B
输出能量, mJ
at 1064 nm	0.4	0.9	2.5
at 532 nm²⁾	0.2	0.45	1.3
at 355 nm³⁾	0.11	0.3	0.8
at 266 nm⁴⁾	0.05	0.15	0.5
脉冲能量稳定性 (Std. Dev), % ⁵⁾
at 1064 nm	1
at 532 nm	2
at 355 nm	3
at 266 nm	4
脉冲宽度 (FWHM), ps ⁶⁾	<25	<25	<80
脉冲宽度稳定性, ±% ⁷⁾	3	3	5
脉冲重复频率, Hz ⁸⁾	1000 or 2000	1000 or 2000	1000
触发模式	Internal/External
典型同步输出脉冲延迟, ns⁹⁾	450
同步输出脉冲抖动(Std. Dev), ns ¹⁰⁾	<0.25
空间模式¹¹⁾	TEM₀₀
光束发散性, mrad ¹²⁾	<1.6
典型的光束直径, mm ¹³⁾	~3
光束指示稳定性, μrad ¹⁴⁾	<30
对照比 (to residual post-pulse)	>200:1
偏振	Linear, >100:1

激光头尺寸 (W x L x H), mm ¹⁵⁾	446 x 1220 x 260
电源尺寸 (W x L x H), mm	340 x 365 x 290	472x460 x 290	472 x 460 x 290

Model	PL2210	PL2210A	PL2210B
Water service	Not required, air cooled
Relative Humidity (non conensing), %	10-80
Operating ambient temperature, °C	22 ± 2
Mains requirements	100-240 VAC, single phase, 47-63 Hz
Power consumption	<0.5	<1	<1

¹⁾ All specifications are subject to change without notice. The parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture. Unless stated otherwise all specifications are measured at 1064 nm.

²⁾ For PL2210x-SH and PL22210x-SH/FH option. Outputs are not simultaneous. Please inquiry for pulse energies for other harmonic generator options.

³⁾ For PL210x-TH option. Outputs are not simultaneous. Please inquiry for pulse energies for other harmonic generator options.

⁴⁾ For PL210x-SH/FH option. Outputs are not simultaneous. Please inquiry for pulse energies for other harmonic generator options.

⁵⁾ Averaged from 300 pulses.

⁶⁾ Optional <80 ps duration.

⁷⁾ Measured over 1 hour period when ambient temperature variation is less than ±2 °C.

⁸⁾ Should be specified while ordering. Inquiry for other pulse repetition rates.

⁹⁾ Delay is negative, SYNC OUT pulse emerges earlier than optical pulse.

¹⁰⁾ In respect to optical pulse. <100 ps jitter is provided with PRETRIG option.

¹¹⁾ Gaussian fit >90%.

¹²⁾ Full angle measured at the 1/e2 point@ 1064 nm.

¹³⁾ Beam diameter is measured @ 1064 nm at the 1/e2 point.

¹⁴⁾ RMS value measured from 300 shots.

¹⁵⁾ 446x1020x260 (WxLxH) laser head size is optional.

Options

Option PRETRIG provides low jitter pulse for streak camera triggering.

Option P80 provides 80 ps output pulse duration. Main specifications:

Model	PL2210	PL2210A
Pulse energy, mJ*	0.7	1.2
Pulse duration (FWHM), ps	<80
Pulse repetition rate, Hz	1000	1000

*At 1064 nm

Option SRT – shorter laser head (1020 mm). Only 1064 nm output is available for this option, for harmonic generation use external harmonic generator unit.