燃烧流体测量设备分站

北京欧兰科技发展有限公司

 


可编程参数记录-LaVision 高速控制器的升级功能


2013年4月3日    阅读次数: 271   
  

Programmable Parameter Recording – an upgrade for LaVision’s HighSpeed Controller

Friday, 8. March 2013

New “Programmable Parameter Recording” option increases flexibility in High-Speed Imaging

With the Programmable Parameter Recording (PPR) LaVision presents an upgrade option for its HighSpeed Controller (HSC) sychronization unit. Especially applications where periodic trigger signals were used for the external synchronization of high speed imaging systems such as time-resolved PIV and / or PLIF benefit from the new PPR upgrade. Typical applications are time- and / or crank-angle based measurements at engine-, spray- or turbine test facilities. The PPR option now enables the definition of multiple recordings per operating cycle. Simultaneously it is possible to adjust recording parameters such as the dt for PIV variably within a cycle. This leads to an increase of flexibility of recording parameters and a better adaption of those to the experiment and thus, an optimized scanning (image recording) with the respective high-speed imaging system can be reached.
 
We’d be happy to check your upgrade options available for your specific applications.
 
If you require further information, please do not hesitate to contact us.

[ 发表评论]  [加入收藏]  [推荐给朋友]  [打印]  [关闭] [论坛讨论]
当前评分:0
Bad  1 2 3 4 5  Good
基于博卡先锋SiteEngine构建
北京欧兰科技发展有限公司 版权所有 电子邮件:info@oplanchina.com,oplan@263.net
联系电话:010-62623871, 62616041,62612809 传真:010-59713638
地址:北京市海淀区上地十街1号辉煌国际中心1号楼1006室 邮政编码:100085   京ICP备07038319号-2
Processed in 0.055 second(s), 6 queries